Request for SF330s (Qualifications) for CFM Healthcare A-E IDIQ - 36C10F26R50011 -- C219

Solicitation / RFP / RFQ

This document is a Request for Standard Form (SF) 330 Architect-Engineer Qualification Packages, not a Request for Proposal (RFP). The Department of Veterans Affairs (VA), Office of Construction and Facilities Management (CFM), is seeking sources for Architect-Engineering (A-E) services. These services will support the VA CFM, Veterans Health Administration (VHA), Veteran Integrated Services Networks (VISN), and VA Medical Centers (VAMC). Services include planning studies, design development, site investigations, facility assessments, feasibility studies, electrical studies, preparation of specifications and drawings, cost estimates, construction document review, RFP development, and construction period services. The anticipated contract type is an Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award Task Order Contract (MATOC).

• A-E services as defined in FAR 2.101 and 36.102-2.

• Services will be performed at VA medical facilities across the United States and its territories.

• Firms must demonstrate technical expertise in areas including utilities, infrastructure, communications network design, medically unique components, sustainable design, commissioning of healthcare facilities, high-tech medical equipment site preparation, VA Physical Security standards, primary/specialty care planning and design, and project phasing for hospital operations.

• Experience in construction period services (field inspections, submittal review, RFI support, commissioning coordination, construction contract changes) is required.

• Knowledge of locality is a selection factor.

• This procurement is a 100% set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns.

• NAICS Code: 541330 “Engineering Services” with a small business size standard of $25.5 Million.

• Approximately twenty (20) firms are intended to be selected for the MATOC.

• Each IDIQ contract will have a 5-year ordering period (one 1-year base and four 1-year options).

• The total capacity for all IDIQs within this MATOC is $790 Million.

• Each awarded A-E firm contract is guaranteed a minimum fee of $2,000.00.

• Firms must submit SF 330 Architect/Engineer Qualification Packages.

• Submission Deadline: February 26, 2026, by 3:00 PM Eastern.

• Submission Method: Searchable Adobe PDF files via email to 003C4C.acquisitions@va.gov.

• SF 330 submission page limit: 50 pages (excluding CPARS, PPQs, and Part II of SF330).

• Evaluation will be based on Specialized Experience and Technical Competence, Professional Qualifications, Past Performance, and Capacity.

• Selection criteria are listed in descending order of importance.

• Discussions will be held with the most highly qualified firms.

• The solicitation (Request for Fee Proposal) will be issued to the highest rated firms.

• Must be a registered SDVOSB concern, certified by the SBA VetCert database at the time of submission, negotiation, and award.

• Firms must be registered in the System for Award Management (SAM).

• No solicitation package, technical information, or bidder list will be issued.

• The government will not pay or reimburse costs associated with responding.

• Attachments include: Statement of Work and Past Performance Questionnaire.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide Architect-Engineer (AE) services in support of the Department of Veterans Affairs (VA), Office of Construction & Facilities Management (CFM), Veterans Health Administration (VHA), and subordinate Veteran Integrated Services Networks (VISN) and VA Medical Centers (VAMC).

The AE will perform services including, but not limited to:

• Planning studies
• Design development
• Site investigations
• Facility assessments
• Feasibility studies
• Electrical studies
• Preparation of specifications and drawings
• Cost estimates
• Construction document review
• Request for Proposal (RFP) development
• Construction period quality assurance/quality control

Services will be performed in accordance with commonly accepted practices, quality, and professional standards for the architect-engineer industry and all applicable local, state, and federal requirements. The VA Technical Information Library (TIL) standards will apply unless otherwise stated in a task order.

The contract covers various functional areas, including:

• Facility Condition Assessment/Baseline Analysis Assessment/Technical Assessment
• Seismic Consulting Services and Technical Studies
• Sustainable Design, Energy Reduction, and Renewable Energy Use Investigations
• Healthcare Planning/Service Delivery Plan Studies and Analyses
• Validation and Gap Mitigation Plan Studies and Analyses/Feasibility Studies
• Functional Programming Studies and Analyses
• Project Development and Definition Support
• Electrical Studies and Analyses
• Planning, Design, and Construction Standards & Criteria Development
• Code Review Services
• Schematic Design
• Design Development (DD)
• Construction Document (CD) Development
• Value Engineering (VE) Review
• Cost Estimates
• Peer Review
• Constructability Review
• Construction Quality Assurance/Quality Control (QA/QC)
• Construction Submittal Review
• Design-Build RFP Package Development
• Building Design
• Construction Period Services Support
• Other AE Services Required (e.g., BIM, interior design, O&M support, IT, hazardous material disposal, construction inspection, commissioning support, DD1391 development)

Work may occur in multiple locations within the Contiguous United States, Alaska, Hawaii, and outlying areas. While the bulk of the work is anticipated to be performed in the contracted AE's home offices, travel to work sites and Government properties may be required for data collection, meetings, and asset assessments.

• Organizational Conflicts of Interest (OCI) provisions apply.
• The AE is responsible for ensuring all designed systems are coordinated with the end user and compatible with existing government systems.
• A Quality Management Plan (QMP) is required.
• All work must comply with current codes, criteria, standards, and regulations, including those in the VA TIL.
• Electronic file storage, transmission, and access via a web-based project information system are required.
• Government-furnished information, property, safety, and training requirements will be identified at the task order level.
• Permits from Federal, state, and local agencies are the responsibility of the AE.
• The Government retains unlimited data rights for all information delivered under the MATOC.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) intended for use by clients to evaluate an Offeror's past performance. The U.S. Department of Veterans Affairs (VA) Office of Construction & Facilities Management (CFM) uses this form when considering Offerors for an Indefinite-Delivery, Indefinite Quantity (IDIQ) contract under the national healthcare Architect and Engineer (A-E) Multiple Award Task Order Contract (MATOC).

Section 1 (Contractor Information): Requires the contractor to provide details about the offeror being evaluated, including name, address, point of contact, work performed, and percentage of project work.

Section 2 (Evaluator Information): Requires the client/evaluator to provide their role and then rate the contractor on:

• Quality
• Schedule/Timeliness of Performance
• Communication
• Management/Personnel/Labor
• Cost/Financial Management
• Subcontract Management
• A summary question asking if the evaluator would hire the firm again.

Adjectival ratings (Outstanding, Above Average, Satisfactory, Unsatisfactory, Not Applicable) with definitions are provided for guidance.

This questionnaire is crucial for bidders as it outlines the criteria the VA CFM will use to assess past performance. Bidders should ensure their clients complete this form accurately and thoroughly. The completed PPQ is to be returned to the Offeror for incorporation into their SF330 submission. Bidders should refer to the solicitation for the SF330 submission due date.

Form / Attachment / Pricing Sheet

This document, "Attachment A - Key Personnel and Minimum Qualifications," outlines the mandatory qualifications and experience required for key personnel proposed by bidders for this opportunity. It serves as a critical component for bidders to ensure their proposed team meets the government's standards.

• General Requirement: All key personnel must demonstrate satisfactory expertise and the ability to communicate effectively within their respective disciplines.
• Replacement Clause: Individuals found unacceptable by the Contracting Officer must be replaced by personnel meeting these minimum qualifications.
• Specific Roles and Qualifications: The document details minimum years of experience, required degrees (e.g., Bachelor's in Architecture, Engineering), professional registrations (e.g., registered architect, professional engineer), and specific technical knowledge for various roles, including:
  • Senior Project Manager
  • Regional Project Manager
  • Architect(s)
  • Civil Site/Sanitary Engineer(s)
  • Electrical Engineer(s)
  • Mechanical Engineer(s)
  • Structural Engineer(s)
  • Transportation Engineer(s)
  • Cost Estimator(s)
  • Interior Designer(s)
  • Construction Inspection/Specifications
  • Environmental Engineer(s)
  • Historical Preservation
  • Fire Protection Engineer
  • Medical Equipment Planner(s)
  • Medical Facility Planner(s)
  • Health Care Planner(s)
  • GIS Specialist(s)
• Technical Knowledge: Many roles require specific knowledge of building codes (e.g., UBC, NFPA), industry standards (e.g., ASTM, ANSI, ASHRAE), regulations (e.g., ADA, OSHA, EPA), and specialized software (e.g., ArcGIS Pro).

Bidders must carefully review this attachment to identify and propose personnel who meet or exceed these qualifications. Failure to propose qualified personnel may result in a non-compliant proposal. This document directly impacts staffing plans and the selection of team members for the proposed effort.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) intended for clients to evaluate an Offeror's past performance. The U.S. Department of Veterans Affairs (VA) Office of Construction & Facilities Management (CFM) uses this form to gather feedback on Offerors being considered for an Indefinite-Delivery, Indefinite Quantity (IDIQ) contract under the national healthcare Architect and Engineer (A-E) Multiple Award Task Order Contract (MATOC).

• Section 1 (Contractor Information): Requires the Offeror to provide details about the contract being evaluated, including contractor information, contract title, number, type, location, dates, and pricing.
• Section 2 (Evaluator Information): Requires the client/evaluator to provide their role and assess the Offeror's performance across several categories: Quality, Schedule/Timeliness, Communication, Management/Personnel/Labor, Cost/Financial Management, and Subcontract Management.
• Adjectival Ratings: Provides definitions for Outstanding, Above Average, Satisfactory, and Unsatisfactory ratings to guide the evaluator.

Offerors must provide this questionnaire to their clients to complete. The completed PPQ is to be incorporated into the Offeror's SF330 submission. Bidders should ensure they provide accurate contract information in Section 1 and follow up with their clients to ensure timely and thorough completion of the evaluation in Section 2. The feedback gathered will significantly impact the evaluation of the Offeror's past performance for the A-E IDIQ MATOC opportunity.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide Architect-Engineer (AE) services in support of the Department of Veterans Affairs (VA), Office of Construction & Facilities Management (CFM), Veterans Health Administration (VHA), and subordinate Veteran Integrated Services Networks (VISN) and VA Medical Centers (VAMC).

AE services include, but are not limited to: planning studies, design development, site investigations, facility assessments, feasibility studies, electrical studies, preparation of specifications and drawings, cost estimates, construction document review, Request for Proposal (RFP) development, and construction period quality assurance/quality control. The work will be performed in accordance with commonly accepted practices, quality, and professional standards for the architect-engineer industry and all applicable local, state, and federal requirements.

• Facility Condition Assessment/Baseline Analysis Assessment/Technical Assessment: Document existing infrastructure conditions and perform technical studies. Deliverables include reports, master plans, studies, data development, drawings, cost estimates, and recommendations.
• Seismic Consulting Services and Technical Studies: Provide consulting and technical studies on structural and/or nonstructural seismic issues. Deliverables include reports, studies, and data development.
• Sustainable Design, Energy Reduction, and Renewable Energy Use Investigations: Provide professional services and technical studies related to sustainable design and construction. Deliverables include reports, studies, data development, drawings, and recommendations.
• Healthcare Planning/Service Delivery Plan Studies and Analyses: Analyze patient demographics and workload projections to optimize healthcare service delivery. Deliverables include a comprehensive service delivery plan.
• Validation and Gap Mitigation Plan Studies and Analyses/Feasibility Studies: Compare existing healthcare asset capabilities to service delivery plans and recommend gap resolutions. Deliverables include recommendations on capital investment options.
• Functional Programming Studies and Analyses: Determine appropriate size and functional programming for new healthcare assets. Deliverables include detailed campus master plans and phasing plans.
• Project Development and Definition Support: Develop project definition packages. Deliverables include executable design and construction/lease documents.
• Electrical Studies and Analyses: Perform data collection and electrical studies. Deliverables include reports, studies, data development, and drawings.
• Planning, Design, and Construction Standards & Criteria Development: Develop and publish planning, design, and construction standards and criteria. Deliverables include publications, studies, and documentation.
• Code Review Services: Provide code consulting, assessment, and evaluation. Deliverables include reports supported by analysis and recommendations.
• Schematic Design: Prepare architectural and engineering calculations, specifications, reports, systems analyses, drawings, and cost estimates. Deliverables include reports, narratives, calculations, drawings, and other required information.
• Design Development (DD): Prepare updated drawings, specifications, and supporting documents. Deliverables include reports, narratives, calculations, draft specifications, drawings, and cost estimates.
• Construction Document (CD) Development: Prepare construction documents including drawings, specifications, and lists. Deliverables include drawings, specifications, and lists.
• Value Engineering (VE) Review: Review design submissions and cost estimates to develop recommendations for enhancing building performance and reducing costs. Deliverables include VE reports with recommendations.
• Cost Estimates: Review and evaluate cost estimates. Deliverables include cost estimate reports.
• Peer Review: Evaluate and recommend on architectural and engineering designs, calculations, and specifications. Deliverables include written recommendations and reports.
• Constructability Review: Analyze construction documents for clarity, accuracy, and completeness. Deliverables include comments and recommendations.
• Construction Quality Assurance/Quality Control (QA/QC): Provide onsite inspection and review of construction. Deliverables include test reports, cost estimates, and submittal reviews.
• Construction Submittal Review: Provide submittal review services for products not listed in construction documents. Deliverables include review of submittals.
• Design-Build RFP Package Development: Develop narratives, specifications, drawings, and cost estimates for design-build contracts. Deliverables include RFP packages.
• Building Design: Design programs for administrative and medical space. Deliverables include design and construction drawings.
• Construction Period Services Support: Assist with interpretation of construction documents and prepare supplemental drawings or documents. Deliverables include assistance with interpretation and recommendations.
• Other AE Services Required: Includes BIM software, interior design, O&M support, telecommunications, physical security, cost analyses, construction inspection, and more.

Work may occur in multiple locations throughout the Contiguous United States, Alaska, Hawaii, and outlying areas. The bulk of the work is anticipated to be performed in the contracted AE's home offices.

• Organizational Conflicts of Interest (OCI) provisions apply, potentially restricting future participation in construction contracts for projects designed under this MATOC.
• All work must comply with the latest version of applicable codes, criteria, standards, and regulations, including VA TIL documents.
• A Quality Management Plan (QMP) and task order specific QMPs are required.
• AE must designate a Program Manager and Project Manager for each task order.
• Electronic file storage, transmission, and access via a web-based project information system are required.
• Government-furnished information, property, safety, and training requirements will be identified at the task order level.
• Unlimited data rights are retained by the Government.

This is a Multiple Award Task Order Contract (MATOC). Task orders will be firm-fixed price (FFP) and will include specific requirements and supplemental information for each task.

Form / Attachment / Pricing Sheet

This document, "Attachment A - Key Personnel and Minimum Qualifications," outlines the mandatory qualifications and experience required for key personnel proposed by bidders for this opportunity. It serves as a critical component for bidders to ensure their proposed team meets the government's standards.

• General Requirement: All key personnel must demonstrate satisfactory expertise and the ability to communicate effectively in their respective disciplines.
• Replacement Clause: Individuals found unacceptable by the Contracting Officer must be replaced with personnel meeting these minimum qualifications.
• Specific Roles and Qualifications: The document details minimum experience (typically 10+ years), required degrees (e.g., Bachelor's in Architecture, Engineering), professional registrations (e.g., registered architect/engineer), and specific knowledge areas for various roles, including:
  • Senior Project Manager
  • Regional Project Manager
  • Architect(s)
  • Civil Site/Sanitary Engineer(s)
  • Electrical Engineer(s)
  • Mechanical Engineer(s)
  • Structural Engineer(s)
  • Transportation Engineer(s)
  • Cost Estimator(s)
  • Interior Designer(s)
  • Construction Inspection/Specifications
  • Environmental Engineer(s)
  • Historical Preservation
  • Fire Protection Engineer
  • Medical Equipment Planner(s)
  • Medical Facility Planner(s)
  • Health Care Planner(s)
  • GIS Specialist(s)
• Technical Standards: Many roles require knowledge of specific codes, standards, and regulations (e.g., NFPA, UBC, ADA, OSHA, EPA, NEC, ASHRAE, ANSI, ASTM, etc.), particularly those related to medical facilities and construction.

Bidders must carefully review this attachment to ensure their proposed key personnel possess the specified qualifications. Failure to meet these minimum requirements for any proposed individual may impact the acceptability of the proposal. This document directly influences staffing plans and the selection of team members for the opportunity.

Solicitation / Request for Qualifications (SF330)

The Department of Veterans Affairs (VA) Office of Construction and Facilities Management (CFM) is seeking Architect-Engineer (A-E) firms for an Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award Task Order Contract (MATOC). This is a request for Standard Form (SF) 330 Architect-Engineer Qualification Packages only, not a Request for Proposal. The MATOC will provide A-E services for various projects at VA medical facilities across the United States and its territories.

• Services: Planning studies, design development, site investigations, facility assessments, feasibility studies, electrical studies, specifications, drawings, cost estimates, construction document review, Request for Proposal (RFP) development, and construction period services.

• Performance: A-E firms must provide all labor, materials, logistical, and administrative support, adhering to professional standards and applicable local, state, and federal requirements.

• Contract Type: Multiple Award Task Order Contract (MATOC) IDIQ.

• Set-Aside: 100% for Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns.

• NAICS Code: 541330 “Engineering Services” (Size Standard: $25.5 Million).

• Awards: Approximately twenty (20) firms are expected to be selected.

• Period of Performance: Each basic IDIQ contract will have a 5-year ordering period (1-year base, four 1-year options).

• Total Capacity: Shared $790 Million across all IDIQs.

• Minimum Guarantee: $2,000.00 per firm.

• On-Ramp Procedures: Government reserves the right to re-open competition for new awardees during the contract term.

• Submission Type: Standard Form (SF) 330 Architect-Engineer Qualification Packages.

• Deadline: February 18, 2026, 2:00 PM Eastern.

• Submission Email: 003C4C.acquisitions@va.gov (Subject: “SF 330 Submission; 36C10F26R50011 CFM Healthcare A-E IDIQ”).

• Format: Searchable Adobe PDF, max 50 pages (excluding CPARS, PPQs, SF330 Part II). Arial 12pt, single spaced, 8.5"x11", standard SF330 margins. Total file size <= 15MB.

• Required Documents: SF 330 (Parts I & II, attachments) and a separate document with firm identification details (Cage, UEI, Tax ID, POC, address).

• Evaluation Criteria (Descending Order): Specialized Experience (e.g., utilities, infrastructure, medical equipment, VA security, project phasing, assessments; 3-5 recent/relevant projects with A-E fees >= $250K), Professional Qualifications (licensed personnel), Past Performance (CPARS, PPQs), Capacity (multiple projects, personnel, reserve), Construction Period Services Experience, Knowledge of Locality.

• Selection Process: Highly qualified firms invited for discussions; highest rated selected for fee proposal negotiation.

• Questions: Submit to 003C4C.acquisitions@va.gov by January 27, 2026, 1:00 PM ET.

• Firms must be registered in SAM and SBA VetCert "certified" at submission, negotiation, and award.

• 100% set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB).

• Joint Ventures must also be SBA-certified.

• SDVOSB prime must limit payments to non-certified firms to <=50% of contract performance.

• This announcement is for qualifications only; the government will not pay for costs associated with responding.

• Offerors are responsible for monitoring SAM.gov for any revisions.

• Referenced Attachments: Statement of Work, Past Performance Questionnaire (PPQ).

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide Architect-Engineer (AE) services in support of the Department of Veterans Affairs (VA), Office of Construction & Facilities Management (CFM), Veterans Health Administration (VHA), and subordinate Veteran Integrated Services Networks (VISN) and VA Medical Centers (VAMC).

The AE will perform services including, but not limited to, planning studies, design development, site investigations, facility assessments, feasibility studies, electrical studies, preparation of specifications and drawings, cost estimates, construction document review, Request for Proposal (RFP) development, and construction period quality assurance/quality control. The services are expected to adhere to commonly accepted practices, quality, and professional standards for the architect-engineer industry and applicable local, state, and federal requirements.

The contract encompasses various functional areas, with specific tasks and deliverables identified at the task order level. These include:

• Facility Condition Assessment/Baseline Analysis Assessment/Technical Assessment
• Seismic Consulting Services and Technical Studies
• Sustainable Design, Energy Reduction, and Renewable Energy Use Investigations
• Healthcare Planning/Service Delivery Plan Studies and Analyses
• Validation and Gap Mitigation Plan Studies and Analyses/Feasibility Studies
• Functional Programming Studies and Analyses
• Project Development and Definition Support
• Electrical Studies and Analyses
• Planning, Design, and Construction Standards & Criteria Development
• Code Review Services
• Schematic Design
• Design Development (DD)
• Construction Document (CD) Development
• Value Engineering (VE) Review
• Cost Estimates
• Peer Review
• Constructability Review
• Construction Quality Assurance/Quality Control (QA/QC)
• Construction Submittal Review
• Design-Build RFP Package Development
• Building Design
• Construction Period Services Support
• Other AE Services Required (e.g., BIM, interior design, OMSI, IT, hazardous material disposal, construction administration, third-party commissioning)

Work may occur in multiple locations throughout the Contiguous United States, Alaska, Hawaii, and outlying areas. While travel to work sites is required for data collection and meetings, the bulk of the work is anticipated to be performed in the contracted AE's home offices.

• Organizational Conflicts of Interest (OCI) provisions apply, preventing the firm that designed a project from being awarded its construction contract without agency approval.
• All work must comply with the most current versions of applicable codes, criteria, standards, and regulations, including those from the VA Technical Information Library (TIL).
• A Quality Management Plan (QMP) is required within 30 days of contract award, with a task order-specific QMP required for each task order.
• Electronic file storage, transmission, and access will be managed via a web-based project information system.
• Government-furnished information, property, safety, training, and security requirements will be identified at the task order level.

Solicitation / RFP / RFQ

This is a Request for Standard Form (SF) 330 Architect-Engineer Qualification Packages for an Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award Task Order Contract (MATOC) for Architect-Engineering (A-E) services. The Department of Veterans Affairs (VA), Office of Construction and Facilities Management (CFM), Office of Facilities Acquisition is seeking these services to support the VA CFM, Veterans Health Administration (VHA), Veteran Integrated Services Networks (VISN), and VA Medical Centers (VAMC). Services include planning studies, design development, facility assessments, construction document review, RFP development, and construction period services.

• A-E services for projects located within the United States and its territories at any VA medical facility.

• Services encompass a broad range of A-E activities as defined by FAR 2.101 and 36.102-2.

• Firms must demonstrate experience in specific areas including utilities, infrastructure, medical equipment site preparation, VA Physical Security standards, primary/specialty care planning, hospital operations during construction, and assessments/studies.

• This is a 100% set-aside for Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns.

• NAICS Code: 541330 "Engineering Services" with a size standard of $25.5 Million.

• Approximately twenty (20) firms are intended to be selected for the MATOC.

• Each IDIQ contract will have a 5-year ordering period (1 base year + 4 option years).

• The MATOC has a shared capacity of $790 Million.

• A minimum fee of $2,000.00 is guaranteed per contract.

• Submission is via SF 330, Architect/Engineer Qualifications, Parts I and II, and attachments.

• Deadline for responses: February 18, 2026, by 2:00 PM Eastern.

• Submission email: 003C4C.acquisitions@va.gov with subject line: “SF 330 Submission; 36C10F26R50011 CFM Healthcare A-E Services IDIQ”.

• SF 330 submissions must not exceed 50 pages (excluding CPARS, PPQs, and Part II of SF330).

• Evaluation will be based on descending order of importance: Specialized Experience and Technical Competence, Professional Qualifications, Past Performance, and Capacity.

• Firms must be registered in SAM.gov at the time of SF330 submission.

• Technical questions deadline: January 27, 2026, by 1:00 PM ET.

• Strictly a 100% set-aside for SDVOSB concerns.

• Offerors must be certified by the SBA Veteran Small Business Certification (VetCert) at the time of submission, negotiation, and award.

• This is a request for qualifications, not a solicitation package.

• No solicitation package, technical information, or bidder list will be issued.

• The government will not pay for costs associated with responding.

• Attachments include: Statement of Work and Past Performance Questionnaire.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) intended for clients to evaluate an Offeror's past performance. The completed questionnaire will be used by the Offeror to incorporate into their SF330 submission for the national healthcare Architect and Engineer (A-E) Multiple Award Task Order Contract (MATOC) – 36C10F26R50011, being procured by the VA CFM.

Section 1: Contractor Information - To be completed by the Offeror, includes details about the Offeror, the contract being evaluated (title, number, type, location, dates, price), and the scope of work performed.

Section 2: Evaluator Information - To be completed by the client/evaluator. It includes:

• Description of the evaluator's role.
• Adjectival ratings and comments for:
  • Quality
  • Schedule/Timeliness of Performance
  • Communication
  • Management/Personnel/Labor
  • Cost/Financial Management
  • Subcontract Management
• A summary question: "Would you hire or work with this firm again?"
• Additional comments.
• Adjectival rating definitions (Outstanding, Above Average, Satisfactory, Unsatisfactory, Not Applicable).

Offerors must provide this questionnaire to their clients for completion. The client will return the completed PPQ to the Offeror, who will then incorporate it into their SF330 submission. This document is critical for demonstrating past performance, a key factor in the evaluation of proposals for the A-E MATOC opportunity. Bidders should ensure their clients understand the importance of thorough and accurate completion of this form.

Form / Attachment / Pricing Sheet

This document outlines the minimum qualifications for key personnel required for the opportunity. It specifies the educational background, years of experience, and specific technical knowledge needed for various roles.

• Senior Project Manager: 10+ years as PM, registered architect/engineer, experience in advanced contract admin, cost/pricing, specs, materials, architectural/structural/mechanical/electrical/civil engineering services, US building codes, scheduling, and medical facility construction.
• Regional Project Manager: 10+ years as PM, registered architect/engineer, experience in contract admin, cost/pricing, specs, materials, architectural/structural/mechanical/electrical/civil engineering services, US building codes, scheduling, and medical facility construction.
• Architect(s): Registered architect, 10+ years as design architect with medical facility experience, Bachelor's in Architecture, knowledge of UBC, NFPA 101, ADA, OSHA, ASTM.
• Civil Site/Sanitary Engineer(s): Registered PE, 10+ years civil sanitary design, Bachelor's in Civil Engineering, experience in site development, utility design, roadways, pavement, cost estimating, landscaping, knowledge of UFAS, ADA, EPA, Federal Water Pollution Control Act, NPDES.
• Electrical Engineer(s): Registered PE, 10+ years electrical design, Bachelor's in Electrical Engineering, experience in power distribution, medical low voltage, emergency power, lighting, fire alarm, communications for healthcare, knowledge of NEC, NFPA 70E, NFPA 72, NFPA 99, 101.
• Mechanical Engineer(s): Registered PE, 10+ years mechanical design, Bachelor's in Mechanical Engineering, experience in mechanical, plumbing, medical gas for healthcare, knowledge of NFPA 99, 101, ASHRAE, ASME.
• Structural Engineer(s): Registered structural engineer, 10+ years structural design (vertical/horizontal), Bachelor's in Civil Engineering or related, expertise in concrete, steel, timber, cost estimating, value engineering, masonry, foundations, lateral load, knowledge of ACI 318, AISC, UBC, Standard Building Code, BOCA, AWS, CRSI.
• Transportation Engineer(s): 10+ years as automatic transport designer, knowledge of materials handling, automatic transport systems, specs, costs, Bachelor's in Engineering, Health Care, Industrial Management, or related.
• Cost Estimator(s): 10+ years cost estimating, Bachelor's in Architecture or Engineering, experience in healthcare facilities, knowledge of vertical/horizontal construction, value engineering, materials, finishes, building systems, medical facility development.
• Interior Designer(s): NCIDQ certified, 10+ years interior design for healthcare facilities (planning, programming, space planning, materials, finishes, signage), Bachelor's in Interior Design or registered architect, knowledge of FSA/VA standards, Federal Supply Schedule.
• Construction Inspection/Specifications: 10+ years experience in construction, renovations, engineering systems (structural/electrical/mechanical/plumbing/utilities), Bachelor's in Architecture, Engineering, or Building Construction Management, medical facility construction experience preferred.
• Environmental Engineer(s): 10+ years experience in industrial facilities and hazardous waste, Bachelor's in Environmental Engineering, knowledge of OSHA, RCRA, CERCLA, National Emission Standards for Hazardous Air Pollutants, NEPA, Federal Water Pollution Control Act, NPDES, pollution standards for soil, waste, lead, asbestos sampling.
• Historical Preservation: 10+ years experience in restoration, rehabilitation, renovation of historic structures, Bachelor's in Architecture, registered architect, knowledge of rehabilitation guidelines, historic registers, materials, cost estimating, specifications.
• Fire Protection Engineer: Registered fire protection engineer, 10+ years experience in NFPA Codes, model building codes, automatic sprinkler/fire alarm systems design/review, health care facility design, fire protection systems acceptance tests.
• Medical Equipment Planner(s): 10+ years experience as Medical Equipment Planner, Bachelor's in Biomedical Engineering, Healthcare Administration, or Allied Health, knowledge of US building codes, scheduling, medical facility construction, developing equipment lists, interpreting needs, analyzing inventory, leading client meetings.
• Medical Facility Planner(s): 10+ years experience in facilities space management, Bachelor's in Architecture, Healthcare, or Business Administration, knowledge of space utilization, workload analysis, budgetary practices, optimizing systems, long-range planning, scheduling, inspection.
• Health Care Planner(s): 15+ years experience in healthcare planning, market/demographic surveys, workload/staffing projections, service line projections, performing analysis of patient demographics and workload to identify optimal provision of services, developing COA analyses, recommending capital investment options.
• GIS Specialist(s): 10+ years experience with GIS (ArcGIS Pro, Esri products), Autodesk/AEC products, Bachelor's in geospatial science or related, expertise in transforming CAD/BIM to GIS, preparing data for Enterprise, working with facility data, georeferencing, transforming maps, incorporating asset data, expertise in Python/ArcPy and process automation.

This document is critical for bidders to identify and confirm that they can provide personnel meeting the specified qualifications for the roles required by the opportunity. It directly impacts staffing plans and the ability to meet contractual requirements.