U.S. Army Contracting Command – Anniston Army Depot (CCTA-HDA) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)

Solicitation / RFP / RFQ

This document, titled "Minor Construction Requirements Type Single Award Task Order Contract (SATOC)" (Aol Title), outlines the Army's intent to procure minor construction and repair services at Anniston Army Depot. It is a "requirements type" contract, meaning task orders will be issued against it for specific jobs as needed.

The contractor will be responsible for performing a variety of construction and repair tasks, which may include but are not limited to:

• Carpentry
• Excavating
• Painting
• Interior & exterior electrical work
• Plumbing
• HVAC
• Concrete masonry
• Facility and production equipment maintenance/repair
• Facilities inspection
• Design build services
• Detailed engineering design The contractor must provide all necessary work, materials, supplies, parts, plant, supervision, and labor, unless specified as government-furnished. Work must adhere to all applicable Federal, State of Alabama, and local laws, regulations, codes, and directives, as well as critical reliability rates or tolerances.

This is a "requirements type" contractual agreement. The specific contract type, period of performance, and estimated value are not detailed in this document, but it is a Single Award Task Order Contract (SATOC).

• Submission Deadline: 4:00 P.M. (CDT) on 30 April 2026.
• Submission Method: Written solution via e-mail to specified Points of Contact (POCs).
• Subject Line: "SOLUTION for Specific Aol 003 Minor Construction Requirements Type Single Award Task Order Contract (SATOC)".
• Evaluation: Interested parties are encouraged to review the ACC-ANAD CSO special posting on www.sam.gov for more information on the evaluation process. Responses received after the due date and time will not be evaluated.

Selected companies will be required to be registered in the System for Award Management (SAM.gov).

• This Aol is derived from ACC-ANAD Commercial Solutions Opening W911KF-25-S-C002, dated 19 May 2025.
• The government is not obligated to extend a request for proposal or make an award.
• This CSO Aol is not an authorization to begin performance and does not obligate the government for any costs incurred by the Offeror.
• The government reserves the right to modify the requirements of this CSO Aol.
• Points of contact for questions are provided.

Solicitation / RFP / RFQ

This document is a Commercial Solutions Opening (CSO) solicitation from the U.S. Army Contracting Command – Anniston Army Depot (ACC-HDA). It aims to acquire innovative commercial items, technologies, and services to modernize the Army's Organic Industrial Base (OIB) through Convergent Manufacturing. The CSO is a competitive procedure intended to streamline the acquisition process for commercial items, technologies, and services, potentially awarding FAR-based contracts under Part 12.

The CSO is open to both traditional and non-traditional defense contractors. It seeks solutions that enable seamless integration of manufacturing resources, including linking legacy systems with digital ones, expanding modeling and simulation, and improving materiel delivery. Specific Areas of Interest (AoIs) will be posted separately and will define the exact requirements. Potential areas include Agile & Adaptive Facilities, Connected Digital Enterprise, Advanced Manufacturing & Maintenance, Automation & Robotics, Process Modernization, Advanced Analytics, Logistics & Inventory Management Modernization, Workforce Development & Human Capital, Energy/Environmental/Chemical Management, and Depot-Wide Maintenance, Diagnostics, and Parts Modernization.

Contracts awarded under this CSO will be fixed-price, potentially including fixed-price incentive fee contracts. The period of performance for any solution brief or CSP is generally expected to be no greater than 12 months, unless otherwise specified in the AoI.

The CSO process is multi-phased and may include:

• Phase 1: Solution Brief: Submission of a written brief (max 5 pages or 15 slides) detailing the technology/service, its innovative aspects, and a rough order of magnitude price. Evaluation is based on responsiveness, technical merit, and funding availability.
• Phase 2: Presentation/Pitch (if applicable): Invited companies present their solution, including a ROM price, IP details, and further information from the brief. Evaluation considers relevancy, technical merit, uniqueness, risk, and business viability.
• Phase 3: Commercial Solution Proposal (CSP): Invited companies submit a detailed technical and price proposal. Evaluation focuses on merit, risk, performance schedule, and price fairness/reasonableness.

The CSO is continuously open until September 30, 2030, with the possibility of extension.

Both traditional and non-traditional defense contractors are eligible. Foreign-owned businesses may submit independently or as part of a team with U.S.-owned businesses.

Companies must have a Unique Entity ID (UEI) and be registered in the System for Award Management (SAM) and PIEE to receive an award. All submissions must be unclassified. The government reserves the right to amend the CSO and add new AoIs.

Questions & Answers / Clarifications

This document provides responses to industry questions regarding Opportunity AoI 0002, specifically related to the Automated Storage and Retrieval System (ASRS) and the Contracting Support Office (CSO) process.

• Data for Design: Specific data regarding weights, SKU counts, types, velocity, and geometry will be provided later in the CSO process. Bidders seeking this information for innovative solutions should anticipate future releases.
• Storage Capacity: Over half of the parts would fit in a standard Vidmar cabinet with four-inch drawers. Bins in mini-loads are currently divided up to 16 times, with some divided into four sections and others undivided.
• Operational Details: The facility typically operates two 11-12 hour shifts. Historically, about 10 people per shift managed the floor, now around 7. Labor reduction is an internal government matter.
• Inventory Definition: Inventory refers to verifying system counts against physical counts, with checkers validating parts using printed reports and physical audits to correct discrepancies.
• Order Fulfillment: Picking is real-time, with the system generating picks that are fulfilled generally the same day.
• Middleware & LMP Integration: Technical documentation for existing middleware is proprietary. Any replacement system must connect to the DoD-owned LMP, not necessarily through existing middleware. Interface requirements for LMP, including IP/port, data formats, and messaging protocols, will be shared later.
• Transaction Acknowledgment: No acknowledgment is provided by LMP or another system once a transaction leaves building 513.
• CSO Phase: The current phase is Phase 1 of the CSO. Bidders should review the original CSO for submission requirements.
• Digital Engineering/Twinning: Not currently used, but can be proposed as a solution brief for potential presentation in a later phase.
• Modernization Approach: Modernization is expected to occur live with minimal impact. Proposals for full system replacement should prioritize minimal operational disruption.
• Facility Power: Building main power is 12470-480/277volt, 3-phase 1500kva transformer with a 2000 Amp distribution panel.
• Installation Responsibility: If new equipment is required, installation is the contractor's responsibility.
• Post-Pick Movement: Parts are moved by forklift to dock crates by shop personnel. The system stops tracking after the pick is complete; LMP tracks further movement.
• IT System Architecture: ASRS runs on HP servers, but the control software runs separately on a Windows 10 PC. This setup is not currently compliant.
• Manual Processes: Moving parts from receiving to mini-load areas and moving picked items to shipping are currently manual (pallet jack, forklift, walking). Recommendations for improvement are welcome.
• Proposal Structure: Multiple options of the same solution type can be in one proposal; fundamentally different solutions require separate submissions.
• Building Structure: All ASRS buildings are freestanding with racks built inside.
• Cyber Requirements: STIG compliance is mandatory.

This Q&A document clarifies operational details, technical requirements, and process steps. Bidders should incorporate this information into their understanding of the ASRS modernization effort and their proposals. Specific data points will be provided later in the CSO process. The current phase is Phase 1.

Questions & Answers / Clarifications

This document provides answers to industry questions regarding the "Oil Pump Test Stand" opportunity (Aol Title: Oil Pump Test Stand, CSO Aol Number: Aol 0001).

• PLC Requirement: The current test stand uses Allen Bradley PLC. While this is the government's current standard, alternative software options are acceptable if the software, cables, and one seat of training are included.

• Stand Operation: The government requires automatic operation for basic pass/fail testing. For diagnostic testing, a manually operated stand is acceptable if it is software-controlled and parameters can be adjusted via potentiometer, keyboard, or touch screen.

• Tooling/Adapters: The government does not have drawings for current tooling or test adapters. Offerors are expected to procure or build all necessary tooling and adapters based on the CSO requirements.

• Test Procedures: Only the test procedures outlined in the Aol document are available at this time. More information may be provided later.

• Site Visit: An organized site visit is scheduled for July 15, 2025, at 10:00 AM CST. Visitors must notify POCs three working days in advance and follow specific check-in procedures.

• The submission deadline for written solutions is August 6, 2025, at 5:00 PM CDT.

• The Aol closes on August 6, 2025, at 5:00 PM CDT.

• Questions regarding the Aol can be sent to the listed Contracting Officers and POCs.

Solicitation / RFP / RFQ

This Area of Interest (Aol) is a request for innovative solutions to update and modernize the Anniston Army Depot's (ANAD) Automatic Storage and Retrieval System (ASRS) Information Technology components. The goal is to bring the system into compliance with current Army Security Technical Implementation Guides (STIG). ANAD is seeking innovative solutions to repurpose, replace, or retrofit the current system, considering new technologies, processes, or methods, or new applications of existing ones.

• The solution must address the Warehouse Management and Control System (WMS &WCS) software, servers, Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), Perle terminal server, and radio components for Automated Guided Vehicles (AGV).

• Contractors must design, manufacture, deliver, transport, install, demonstrate functional operation, and provide operator and maintenance training for the equipment.

• The solution must interface with the Army's Logistics Modernization Program (LMP) via TCP/IP and middleware.

• Cyber Compliance is a required element.

• The document does not specify contract type, period of performance, or estimated value.

• Site Visit: An organized site visit is scheduled for 25 June 2025, 10:00 AM CST. Interested parties must notify POCs at least three working days prior.

• Submission Deadline: Written solutions must be submitted via email by 5:00 PM CDT on 10 July 2025.

• Submission Subject Line: "INNOVATIVE SOLUTION for Specific Aol 002 ASRS"

• Solutions received after the deadline will not be evaluated.

• The Aol closes at 5:00 PM CDT on 10 July 2025.

• Any selected company must be registered in the System for Award Management (SAM.gov).

• This CSO Aol is not an obligation to award a contract.

• ACC-ANAD reserves the right to modify the requirements.

• The authority for this CSO Aol is derived from ACC-ANAD Commercial Solutions Opening W911KF-25-S-C002, dated 19 May 2025, citing Section 803 of the National Defense Authorization Act for FY2022 and Class Deviation 2022-00007.

• Points of Contact for questions are provided.

Solicitation / RFP / RFQ

This document is a Commercial Solutions Opening (CSO) solicitation from the U.S. Army Contracting Command – Anniston Army Depot. It aims to acquire innovative commercial items, technologies, and services to modernize the Army's Organic Industrial Base (OIB) through Convergent Manufacturing. This includes advancements in agile facilities, connected digital enterprise, advanced manufacturing, Digital Twin, automation, and cybersecurity. The CSO is authorized under DFARS Subpart 212-70 and utilizes FAR Part 12 Commercial Item Procedures.

This CSO is a broad, continuously open solicitation until September 30, 2030, seeking innovative commercial products, technologies, and services. It may include linking legacy systems with modern digital systems, expanding modeling and simulation, and delivering materiel solutions. Specific requirements will be detailed in individual Areas of Interest (AoIs) posted separately.

Contracts awarded will be FAR-based, under Part 12 Commercial Item Procedures. Contracts will be fixed-price, potentially including fixed-price incentive fee contracts. The period of performance for any solution brief or CSP is generally no greater than 12 months, unless specified otherwise in an AoI.

The process may involve multiple phases: Phase 1 (Solution Brief), Phase 2 (Presentation/Pitch, if applicable), and Phase 3 (Commercial Solution Proposal - CSP). Solution briefs should not exceed five pages or fifteen slides and must include company information, executive summary, technology concept, and rough order of magnitude price. Evaluation is based on responsiveness, technical merit, and funding availability. Companies are encouraged to check SAM.gov for new AoI postings.

Both traditional and non-traditional defense contractors are eligible. Foreign-Owned businesses may submit independently or as part of a teaming arrangement with U.S.-Owned businesses.

• All submissions must be unclassified.
• Companies must have a Unique Entity ID (UEI) and be registered in SAM and PIEE to receive an award.
• The government reserves the right to amend the CSO and to award to all, some, or none of the selected solutions.
• Contact information for the Contracting Officer (Amber Burdett) and CSO POC (Diana Ponder) is provided.